Chameleon Labs 7602
Features: The Chameleon Labs 7602 microphone preamplifier features transformer balanced input with a range between 20dB and 80 dB of gain. The separate line input is transformer balanced and accepts input levels from -20 to +10dB. The equalizer section is a selectable 3 band design with a flexible filter section. It utilizes pure class ‘A’ circuitry. This unit is made with 100% discrete components, hand wound transformers and was fabricated to precisely match vintage counterparts manufactured in the early to mid 70’s.
HP Filter - This is a high pass filter with 3db loss at 300Hz, 160Hz, 80Hz, and 50Hz with an 18dbcut per octave slope.
Low Equalization - This section has a shelving slope with four frequency selections: 220Hz, 110Hz, 60Hz, 35Hz. This equalizer affects the selected frequency and all others below it.
Mid Equalization -This section has a peaking characteristic with six frequency selections: 360Hz, 700Hz, 1.6k, 3.2k, 4.8k, and 7.2k. The gain control provides 20db of boost or cut.
High Equalization - This section has a shelving characteristic with five frequency selections: 16k, 12k, 7k, 4.9k and 3.4k . This section adjusts the selected frequency and all others above it. The gain control provides 20db of boost or cut.
Chameleon Labs 7602 Specifications: Input impedance: DI = 100K ohm, Line = 10K ohm, Mic = 1.2K ohm, Output impedance: 600 ohm. Maximum output level: +28dBm. Noise: <-8.5 dBm
Chameleon Labs 7602 System Requirements: The CPS-1 power supply is required to power up to 2 7602 units.
Power Supply - The 7602 is designed to be used with the Chameleon power supply. Use of any other power supply may damage the 7602 electronics and void the warranty. The Chameleon power supply will properly power two Model 7602 units.
List $899 The High Profile Price is $699
Chameleon Labs CPS-1
The CPS-1 is a 1U rack mountable regulated, toroidal power supply for the 7602. The single power supply powers up to two units for dual channel operation.
List $129 The High Profile Price is $96