Input Stage Modeling

The Input Stage is a good place to start. Here you choose the soul of the plug-in!
Click on the Drop Down Button and the list of the 26 Input Stages will display.
Select the Input Stage of your choice – Iron (Transformer), Tape, Tube or Iron/Tape combos. Plus, it now features 5 new summing buss algorithms

The Intensity slider adjusts the Input Stage amount. 100% is where the sample was taken.
Lower to lessen the effect and boost up to 200% to amplify the effect.

The Compressor Section

The Compressor includes its own starting point presets! Including Console, Tape Machine, Tube, and ANALOG GLUE! :)

You can also choose from classic compressor models from some of our favorite vintage and modern compressors.

The Equalizer Section

There are
Global Presets that will set up the Strip Pro as completely different consoles with corresponding
Input Stages and Compressors by year. Example 1951, 1967, 1970, 1980 etc... Also includes the NEW 1972 model!

Features a Drop down above each bands Q control
that allows you to select from the current available EQ Models.

Filter Section

Select “SideChain” to use the Filters to effect the Compressor Section
Check out the Factory Presets under “Effects” to learn how to set up the Sidechain
for De-Esser, Ducker, talkback Mic, Telephone effects.

Signal Flow

The Signal Flow Display section acts as a Master Bypass
and Bypass for each individual section (Compressor, EQ, Filters). The order of the buttons represents how the signal passes through the plug-in.
You can change the signal flow and order of the buttons using the Pre/Post switches
located at the bottom of the Compressor Section and top of the Filters section.